Copy levels to all cues
Copy levels to all cues
I’d like to find the correct colour and then copy that value to all the other cues in one go. At the moment, I have to go into every cue and set the colour again. It’s a tedious task that should only take a few seconds, but it takes me far too long, and no one has been able to explain how I could do it quickly.
Re: Copy levels to all cues
To copy the level(s) of channel(s) to a cue or range of cues, use the copyTo: command line directive. You can copy channels and subchannels using this function. When working with non-conventional fixtures, it is best applied to channels with the same fixture profile.
For example, let's assume you have cues 1 to 57 and you have RBG lights on channels 1 to 10 and RGBA lights on channels 11 to 20.
First, in cue 1, set the colors for all the channels. You can set one color for channels 1-5 and a different color for channels 6-10, channels 11-15, and channels 16-20.
Because channels 1-10 control the same type of fixture, you can select them all:
Type [1] [/] [1] [0] on the command line. (or select the channels with the mouse/trackpad by clicking on them)
Then, to copy the levels into all the rest of your cues:
Type [c] [2] [/] [5] [7] [return].
Because the fixtures have more than intensity, you'll get a list of all the subchannels you can copy. Presumably, you don't want to copy the intensity level, only the color. So, uncheck intensity. Click OK.
You can repeat this for channels 11-20:
[1] [1] [/] [2] [0] [c] [2] [/] [5] [7] [return]
Again, uncheck intensity and click OK. Your colors are now copied to all the cues.
For example, let's assume you have cues 1 to 57 and you have RBG lights on channels 1 to 10 and RGBA lights on channels 11 to 20.
First, in cue 1, set the colors for all the channels. You can set one color for channels 1-5 and a different color for channels 6-10, channels 11-15, and channels 16-20.
Because channels 1-10 control the same type of fixture, you can select them all:
Type [1] [/] [1] [0] on the command line. (or select the channels with the mouse/trackpad by clicking on them)
Then, to copy the levels into all the rest of your cues:
Type [c] [2] [/] [5] [7] [return].
1>10copyTo:2>57
Because the fixtures have more than intensity, you'll get a list of all the subchannels you can copy. Presumably, you don't want to copy the intensity level, only the color. So, uncheck intensity. Click OK.
You can repeat this for channels 11-20:
[1] [1] [/] [2] [0] [c] [2] [/] [5] [7] [return]
11>20copyTo:2>57
Again, uncheck intensity and click OK. Your colors are now copied to all the cues.