fixture with CT channels

Questions and issues concerning LXConsole (MacOS)
elk
Posts: 2
Joined: Wed Jun 08, 2022 7:39 am

fixture with CT channels

Postby elk » Wed Jun 08, 2022 7:41 am

hi,
i can't find a way to patch a fixture with cold white, warm white and amber. it's a sunstrip so 12 parts to one fixture.
there seems to be no suitable mix type.
any suggestions?

thanks

admin
Site Admin
Posts: 225
Joined: Mon Nov 20, 2017 4:31 pm

Re: fixture with CT channels

Postby admin » Thu Jun 09, 2022 1:11 pm

That is not a common set of LED colors. There is no support for that mix type. However, assigning a mix type primarily allows you to use the color picker in the Inspector's channel tab to select the color of a channel. For warm/cool white mix, you would use the individual color faders anyway.

If you have a link to the manual for the fixture, post it for more specific advice. How you might patch the fixture depends on if you want to individually control all the cells of simply control the color/intensity of the entire strip.