To copy the level(s) of channel(s) to a cue or range of cues, use the copyTo: command line directive. You can copy channels and subchannels using this function. When working with non-conventional fixtures, it is best applied to channels with the same fixture profile.
For example, let's assume you have cues 1 to 57 and you have RBG lights on channels 1 to 10 and RGBA lights on channels 11 to 20.
First, in cue 1, set the colors for all the channels. You can set one color for channels 1-5 and a different color for channels 6-10, channels 11-15, and channels 16-20.
Because channels 1-10 control the same type of fixture, you can select them all:
Type
[1] [/] [1] [0] on the command line. (or select the channels with the mouse/trackpad by clicking on them)
Then, to copy the levels into all the rest of your cues:
Type
[c] [2] [/] [5] [7] [return].
1>10copyTo:2>57
Because the fixtures have more than intensity, you'll get a list of all the subchannels you can copy. Presumably, you don't want to copy the intensity level, only the color. So, uncheck intensity. Click OK.
You can repeat this for channels 11-20:
[1] [1] [/] [2] [0] [c] [2] [/] [5] [7] [return]11>20copyTo:2>57
Again, uncheck intensity and click OK. Your colors are now copied to all the cues.