Hello,
Where are stored the Position and Color Defined value and how to modified them ?
If I use one-off those to create a Cue this Cue shall be updated if I update a defined value ?
Thanks for your help.
Defined Value
Re: Defined Value
Defined values are found in the channel setup sheet. Enter a channel number or click on the channel number in the channel display. Then choose Channel->Setup Hilited Channels... Select a part in the parts table and click the Edit button. In the sub channels table, select a subchannel. Then, you can edit its defined values on the right side of the window.
Defined values are not presets. They are just shortcuts to selecting a DMX value for a subchannel. If you want to have a preset that, if changed, changes cues, use a group. Then, add the group to a cue using the Inspector's Cue Options tab in Cues (blind) display mode.
Defined values are not presets. They are just shortcuts to selecting a DMX value for a subchannel. If you want to have a preset that, if changed, changes cues, use a group. Then, add the group to a cue using the Inspector's Cue Options tab in Cues (blind) display mode.
Re: Defined Value
Thank you for your answer.
If I only want to record the pan and tilt values of a GLP Impression FR1 in a group, how do I do it?
If I only want to record the pan and tilt values of a GLP Impression FR1 in a group, how do I do it?
Re: Defined Value
Put the fixture in the desired location (Live mode).
Press [r] [g] followed by the group number and [enter/return]
Switch to Group display mode.
Press [g] followed by the group number and [enter/return]
Choose Channel->Unmark All. (Choose every subchannel to unmark)
Enter the channel number or click on the channel in the display to select it.
Choose Channel->Mark Selected
When presented with a choice of which sub channels, use the popup to "Select Position". Only the Pan and Tilt sub channels will be checked.
Click OK.
The group now will only set the pan and tilt for the channel when included in a cue.
Only Marked Channels/Subchannels are set in a cue that includes the group. You can have a group set more than one channel. Or, just the Pan and Tilt of some channels. The example above is just the pan and tilt of one channel. But by marking what you want, you have full control of what the preset group does.
Press [r] [g] followed by the group number and [enter/return]
Switch to Group display mode.
Press [g] followed by the group number and [enter/return]
Choose Channel->Unmark All. (Choose every subchannel to unmark)
Enter the channel number or click on the channel in the display to select it.
Choose Channel->Mark Selected
When presented with a choice of which sub channels, use the popup to "Select Position". Only the Pan and Tilt sub channels will be checked.
Click OK.
The group now will only set the pan and tilt for the channel when included in a cue.
Only Marked Channels/Subchannels are set in a cue that includes the group. You can have a group set more than one channel. Or, just the Pan and Tilt of some channels. The example above is just the pan and tilt of one channel. But by marking what you want, you have full control of what the preset group does.
Re: Defined Value
actually there is a faster way:
In Live, set the fixture to the desired location.
With the channel selected, press [a], [g] which expands to "@record group:"
Enter the group number and press [return or enter]
When asked, select only the position (pan and tilt) subchannels.
Only the selected subchannels will be recorded and marked in the group.
In Live, set the fixture to the desired location.
With the channel selected, press [a], [g] which expands to "@record group:"
Enter the group number and press [return or enter]
When asked, select only the position (pan and tilt) subchannels.
Only the selected subchannels will be recorded and marked in the group.
Re: Defined Value
It's working well 
Thank's for your help
Thank's for your help