Im trying to show a customer a few simple sketches using the model window.
Only problem is that i've drawn a stage which is 1.02 metres high and the model refuses to change altitude so its kind of sunken halfway through the floor all the time.
Changing value for Z position does nothing, all other parameters seem to work.
running LXBeams Version 6.4.2 (19322.1)
The model and its z level
-
- Posts: 17
- Joined: Wed Feb 23, 2022 6:22 pm
- Location: Malmö, Sweden
- Contact:
Re: The model and its z level
I don't know why this wouldn't work. I tried a couple of computers and LXBeams 6.5 both Intel and Apple Silicon with Sonoma and the z translation for the model worked as it should. All I can think is that you do have to hit return/enter after changing the value in the controls of the model window. I entered "1.2m" for the z and the model rose up off the floor (which is always at 0 in the model world).
-
- Posts: 17
- Joined: Wed Feb 23, 2022 6:22 pm
- Location: Malmö, Sweden
- Contact:
Re: The model and its z level
Here they are, sunken into a floor which is 102 cms high.
They can be moved anywhere except up or down.
-
- Posts: 17
- Joined: Wed Feb 23, 2022 6:22 pm
- Location: Malmö, Sweden
- Contact:
Re: The model and its z level
Just to be sure, you are using the document origin correct? That matches the origin of the document to (0,0,0) in the model's world coordinates. That is going to be necessary for your stage height to be rendered so it matches the document world. If you don't use the document origin, the world origin is matched to the model origin that is specified in the settings.
In the model window's settings, look at the model tab and click "Advanced". You'll see a checkbox to use the document origin there. Be sure it is checked. Not using the document origin would be a special case and it would be uncommon to want to do that. That's why it is hidden in the advanced controls that generally don't want to be changed from the defaults.
In the model window's settings, look at the model tab and click "Advanced". You'll see a checkbox to use the document origin there. Be sure it is checked. Not using the document origin would be a special case and it would be uncommon to want to do that. That's why it is hidden in the advanced controls that generally don't want to be changed from the defaults.
-
- Posts: 17
- Joined: Wed Feb 23, 2022 6:22 pm
- Location: Malmö, Sweden
- Contact:
Re: The model and its z level
Now they are in "document origin". That made it possible to use the Z level, but screwed up the camera position
But I guess that can be fiddled with somehow.
I dont think I've ever looked under that "advanced" button before. Or maybe I did years ago and left it in a strange mode.
Thanks Claude.
Re: The model and its z level
For clarification, the coordinate systems are relative to each other:
If you use the document origin, the translation settings for the model move the model in relationship to 3D objects in the main drawing.
If you don't use the document origin, the translation settings for the model move the 3D objects in the main drawing in relationship to the model (x,y). The z coordinate is 0 unless the Beams preferences are set to "use beam plane as origin z". In which case the beam plane height becomes the z coordinate.
Mostly the second option, not using the document origin, would allow translation of 3D coordinates for export, rather than being used to render an image in the model window. That is why it is uncommon and hidden in the advanced controls.
If you use the document origin, the translation settings for the model move the model in relationship to 3D objects in the main drawing.
If you don't use the document origin, the translation settings for the model move the 3D objects in the main drawing in relationship to the model (x,y). The z coordinate is 0 unless the Beams preferences are set to "use beam plane as origin z". In which case the beam plane height becomes the z coordinate.
Mostly the second option, not using the document origin, would allow translation of 3D coordinates for export, rather than being used to render an image in the model window. That is why it is uncommon and hidden in the advanced controls.