Page 1 of 1

Auto numbering not working

Posted: Sun Oct 08, 2023 6:48 am
by Lloyd Riford
Aloha,
My first electric is missing instrument #12 and Auto-renumber won't renumber the pipe. Neither Auto-number under Format/Position nor the right click popup on the position fix the numbering.

I've never seen this before. See attachment.

Lloyd

Re: Auto numbering not working

Posted: Sun Oct 08, 2023 5:26 pm
by admin
Select the position and look in the Inspector's position tab. What does the numbering option say?


Next, make sure that all the lights and the position are on the same layer.

If not, make the layer containing the position selectable.

Re: Auto numbering not working

Posted: Sun Oct 08, 2023 6:41 pm
by Lloyd Riford
Aloha,

The culprit was a fixture on a layer called Suggested that I thought I had cleaned out once we settled on the placement of specials. I had deleted the Saved View, but not the layer. Thank you for the quick solution and I will remember that in the future.

Mahalo!

Lloyd